✔ E24 Series Resistors

E24 Series Resistors

- March 16, 2018

28372 for technical questions contact. Technically the e24 series is for 5 resistors but it is easy and cheap to get all of these common values as 1 resistors.

Standard Resistor Value Table A8 Blog

Resistor Color Codes Color Codes Electronics Textbook

How To Figure Out What Resistors Are In The E12 And E24

E24 series tolerance 5 and 1.

E24 series resistors. 22 aug 12 1 document number. The e12 series of resistor values including their color codes. The iec publication 60063.

The e24 series is for resistors with a 5 tolerance precision. The following is a long list of all e24 series resistors from 01 ohm to 10 m ohms with the shorthand notation tolerance range and color code. Preferred number series for resistors and capacitors specifies the preferred values in the e24 series which is the most often used.

The 4th band is always gold 5 tolerance for the e24 series. Technical articles standard values used in capacitors inductors and resistors. This is the e12 series shown in the table below.

Following this logic the preferred values for 10 tolerance resistors between 100 and 1000 ohms would be 100 120 150 180 220 270 330 and so on rounded appropriately. This will reduce the number of different components in a design and for large scale production this will help reduce costs. The tolerance is 10.

E6 e12 e24 e96. Although resistors in ranges up to e24 are widely available it often helps in any design to focus on using as small a number of resistor values as possible. The 120 ohm resistor has a value ranging between 110 and 130 ohms.

Eia define standard series of resistor values. These drawers could also be used for other small components and the labels could be easily made out of card stock instead of being printed. It consists of the e3 e6 e12 e24 e48 e96 and e192 series where the number after the e designates the quantity of value steps in each.

Standard values used in capacitors inductors and resistors. The e series is a system of preferred numbers also called preferred values derived for use in electronic components. E3 e6 e12 e24 e48 and e96.

The e12 series is probably the most common series and exist for almost every resistor.